Differences

This shows you the differences between two versions of the page.

--- router [2021/12/15 10:15] – arnaud_poletto
+++ router [2021/12/15 14:26] (current) – removed arnaud_poletto
@@ Line 1: / Line 1: @@
-====== Router setup ======
-==== Purpose and scope ====
-This page describes the procedures used to successfully install the local router and secure its network.
-==== Prerequisite ====
-None
-==== Material ====
-You will need the following material:
-  * A router
-  * A second mobile router (depending on your configuration)
-  * A SIM card
-  * A smartphone
-==== Router setup ====
-In this section, we will setup a single router connected to the internet using a SIM card. This router will give internet access to the medAL-hub and/or tablets. If you cannot access the internet on site and need a second distant router, follow a different approach: [[router#Mobile router setup]]. To achieve this, follow this procedure:
-  - Check the sim card’s phone number:
-    - Insert it in a phone.
-    - For VODACOM, call //*106#//.
-    - Select //1//.
-    - Write it down.
-  - Insert the sim card in the router.
-  - Turn on the router.
-  - Connect your computer to the router (using an ethernet cable or Wi-Fi).
-  - Identify the router IP address. If you are on Windows, run the command: \\ <code>ipconfig</code> \\ And look for the ''Default Gateway'' IP address.
-  - Write the IP address in the web browser url space and press //Enter//.
-  - Change the router admin password. Strong password is highly recommended: \\ username: //admin// \\ password: //Dain@m1c//
-  - Update the wireless ssid and its password to: \\ ssid: //health_facility_dynamic// \\ password: //SbqCdzBoW8amSx//
-  - Save the configuration.
-  - Check that you have access to the internet.
-  - Buy the internet bundle. This can be done by inserting the SIM card into a smartphone, and adding funds to the SIM card. You will then be able to buy the internet bundle.
-  - Check that you have access to the internet: \\ <code>ping google.com</code>
-==== Mobile router setup ====
-In this section, we will setup a first router to offer a local network on site. This will allow the hub and tablets to communicate to each other. A second mobile router connected to the internet will also be available to export medical cases regularly. To achieve this, follow this procedure: