Differences

This shows you the differences between two versions of the page.

--- it-physical-deployment [2021/12/14 16:57] – created arnaud_poletto
+++ it-physical-deployment [2022/01/10 13:37] (current) – arnaud_poletto
@@ Line 1: / Line 1: @@
-====Health Facility IT Physical deployment====
+======Router setup ======
+==== Purpose and scope ====
+This page describes the procedures used to successfully install the local router and secure its network.
+==== Prerequisite ====
+None
+==== Material ====
+You will need the following material:
+  * A router
+  * A SIM card
+  * A smartphone
+== Router setup ==
+  - Check the sim card’s phone number:
+    - Insert it in a phone.
+    - For VODACOM, call //*106#//.
+    - Select //1//.
+    - Write it down.
+  - Insert the sim card in the router.
+  - Turn on the router.
+  - Connect your computer to the router (using an ethernet cable or Wi-Fi).
+  - Identify the router IP address, you can find it at the bottom of the router or you can find it using your computer by looking to the network properties.
+  - Write the IP address in the web browser url space and press //Enter//.
+  - Change the router admin password, Strong password is highly recommended: \\ username: //admin// \\ password: //Check with an administrator to have access to the password.//
+  - Update the wireless ID and its password to: \\ ssid: //Dynamic Study// \\ password: //Check with an administrator to have access to the password.//
+  - Save the configuration.
+  - Check that you have access to the internet.
+  - Buy the internet bundle. This can be done by inserting the SIM card into a smartphone, and adding funds to the SIM card. You will then be able to buy the internet bundle.